News
News - MagnetSwitch
MagnetSwitch
MagnetSwitch is a specialized controller designed to control the light inside cabinets, drawers, or wardrobes. Thanks to 3-axes MEMs magnetometer sensor (e-compass), it can detect a very slight change in the magnetic field with extremely high precision. Because of this, the distance from the magnet can be many times longer than traditional sensors (mechanical, reed, optical). The mounting direction is not essential because the calibration algorithm detects the best axis during the first door opening. The controller has a smooth light increase and decreases function for eyes protection and 15 minutes eco timer. If you forget to close the door, the light will turn off after this time.
- Sensitive magnetometer IC
- May be installed in a profile
- Easy calibration of the sensor
- Soft dimming
- Long-range of detection
- Easy to use
|
Article number |
LWATDL475-3A |
LW05MGSWITCHL491-1X16A-CV |
|
Size LxWxH |
35x8x2 mm |
66,5x27,5x15,5 mm |
|
Maximum output current |
3 A |
16 A |
|
Maximum output power |
81 W |
384 W |
|
Power consumption |
< 0,4 W |
|
|
Power supply type |
Constant Voltage (CV) |
|
|
Power supply voltage |
8 - 27 V DC |
|
|
Eco-timer |
15 minutes |
|
|
Calibration method |
Semi-Automatic |
|
|
Detection range |
up to 600mm (Depends on magnet size) |
|
|
Connection type |
Solder pads |
Screw terminals |
|
Ambient temperature |
0 - 40°C |
|
- Datasheet EN_Manual_MagnetSwitch_3A
